Pay in 4 interest-free payments of $3.79 Learn more
Ships within 48 hours · Estimated delivery Sep 5 - Sep 10
MC33926 H-Bridge Datasheet
four 1-1/4" screws
Programmable 16 MHz Atmel ATmega32U4 AVR microcontroller 32 KB flash (4 KB used by bootloader
5 A for 150 seconds before exceeding its maximum temperature rating of 150°C
soft-start
Stepper Motor: Bipolar, 200 Steps/Rev, 35x28mm, 10V, 500mA hub-labor MC33926 H-Bridge DatasheetThis bipolar hybrid stepper motor has a 1. 8 step angle (200 steps revolution). Each phase draws 500 mA at 10 V, resulting in a holding torque of 1000 g cm (14 oz in). The stepper motor has four colored wires with bare ends: black and green go to one coil; red and blue to the other. The motor can be controlled by a suitable pair of H bridges (one for each coil), but we recommend using a bipolar stepper motor driver. 5mm mounting hubs can be used to
US$ 12.99
US$ 49.95
US$ 18.00
US$ 14.95
US$ 16.99
US$ 20.00
US$ 18.99
US$ 10.00
US$ 36.95
US$ 18.00
US$ 20.00
US$ 14.00
US$ 14.00
US$ 22.95
US$ 14.00
US$ 29.95
US$ 39.95
US$ 15.00
US$ 29.95
