KM52 by Dixon Valve | King Hose Mender/Splicer | For Two Clamps | 5/8" Hose ID x 5/8" Hose ID | Steel Collection-lvl2_Ends for Hydraulic Hose Threads BLS414 - SLS414 -

Threads BLS414 - SLS414 - 1/2" 1/2" Male NPSM BLS416 - - - 1/2" 3/4" Male NPSM BLS516 - - - 5/8" 3/4" Male NPSM BLS616 - SLS616 - 3/4" 3/4" Male NPSM 5931616C BLS818 SLS818 - 1" 1" Male NPSM

5 lbs L15599 200/300 Stainless Steel 5/8" 100/Box 1

Vibration: Good resistance - use long nut when greater vibration resistance is required

Applications & Markets: Hydraulic tool (HTMA interchange)

7mm) 1-1/16" HS4BF4-S Plug/Male 1/2" 1/2" - 14 Female BSPP 303 Stainless 1

KM52 by Dixon Valve | King Hose Mender/Splicer | For Two Clamps | 5/8" Hose ID x 5/8" Hose ID | Steel Collection-lvl2_Ends for Hydraulic Hose Threads BLS414 - SLS414 -Safety Notes: Menders are not for compressible products such as air, nitrogen or steam. The working pressure may vary with the construction of the hose, the type of clamping system used and the application. In accordance with the R. M. A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1 1 2 times the working pressure and held for fifteen minutes without leaking or coupling movement. For