30344 by Midland | Push On Hose Barb | Ballseat Swivel | 3/8" Hose ID x 3/8" Female NPSM | Brass LegacyProductTypeReplacement_Dixon Boss Wing Nut Caps 8mm 32mm SS9200-12-25 -12 JIC

8mm 32mm SS9200-12-25 -12 JIC Male 3/4" 1-1/16 - 12 UNF 25mm DIN STANDPIPE Female 25mm 25mm 65mm 32mm SS9200-16-25 -16 JIC Male 1" 1-5/16 - 12 UN 25mm DIN STANDPIPE Female 25mm 25mm 68

51" 1-7/8" 1AV20FRB20 20Z-A40

Fire and explosion could occur causing severe bodily injury or death

Thread ends in ANSI B1

Pipe: 1-3/4" S3015R - 7/8" 1-1/2" S3016R S5021R 1" Tube: 1-1/2"

30344 by Midland | Push On Hose Barb | Ballseat Swivel | 3/8" Hose ID x 3/8" Female NPSM | Brass LegacyProductTypeReplacement_Dixon Boss Wing Nut Caps 8mm 32mm SS9200-12-25 -12 JICApplications: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness. Midland Parts have been tested to max 150 PSI Advantages: Easy assembly. No clamps needed. SAE Rating: N A Lead Free: No Assembly Instructions: 1) Lubricate insert. 2) Hold hose at angle as shown & push on and up over first barb. 3) Continue to push straight on until hose is seated under protective plastic cap. Keep hands back from hose end